 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 1.5SMC SERIES 1500 Watts Surface Mount Transient Voltage Suppressor SMC/DO-214AB .124(3.15) .112(2.85) .245(6.22) .220(5.59) Features For surface mounted application in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Excellent clamping capability Fast response time: Typically less than 1.0ps from 0 volt to BV min. Typical IR less than 1A above 10V High temperature soldering guaranteed: 260oC / 10 seconds at terminals Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0 1500 watts peak pulse power capability with a 10 x 1000 us waveform by 0.01% duty cycle .280(7.11) .260(6.60) .012(.31) .006(.15) .103(2.62) .079(2.00) .008(.20) .071(1.8) .039(1.0) .320(8.13) .305(7.75) .004(.10) Dimensions in inches and (millimeters) Mechanical Data Case: Molded plastic Terminals: Solder plated Polarity: Indicated by cathode band Standard packaging: 16mm tape (EIA STD RS-481) Weight: 0.21gram Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Type Number o Peak Power Dissipation at TA=25 C, Tp=1ms (Note 1) Power Dissipation on Intinite Heatsink, TA=50oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 2, 3) - Unidirectional Only Thermal Resistance Junction to Ambient Air (Note 4) Thermal Resistance Junction to Leads Operating and Storage Temperature Range Notes: Symbol PPK PM(AV) IFSM RJA RJL Value Minimum 1500 6.5 200 50 15 -55 to + 150 Units Watts W Amps o o C/W C/W o C Devices for Bipolar Applications 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25oC Per Fig. 2. 2. Mounted on 8.0mm2 (.013mm Thick) Copper Pads to Each Terminal. 3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute Maximum. 4. Mounted on 5.0mm2(.013mm thick) land areas. 1. For Bidrectional Use C or CA Suffix for Types 1.5SMC6.8 through Types 1.5SMC200A. 2. Electrical Characteristics Apply in Both Directions. TJ, TSTG - 546 - Version: A06 RATINGS AND CHARACTERISTIC CURVES (1.5SMC SERIES) FIG.1- PEAK PULSE POWER RATING CURVE 100 200 FIG.2- PULSE DERATING CURVE PPPM, PEAK PULSE POWER, KW 10 1 DERATING IN PERCENTAGE. % NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG.3 O TA = 25 C PEAK PULSE POWER (PPP) or CURRENT (IPPM) 150 100 50 0.1 0.1 s 1s 10 s 100 s 1.0ms 10ms 0 0 25 50 75 100 125 O 150 175 200 tp, PULSE WIDTH, sec. TA, AMBIENT TEMPERATURE. ( C) FIG.3- CLAMPING POWER PULSE WAVEFORM 150 FIG.4- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY 200 tr = 10 sec PEAK PULSE CURRENT - % IFSM, PEAK FORWARD SURGE CURRENT, AMPERES 100 Peak Value IPPM PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPPM 100 8.3ms Single Half Sine Wave JEDEC Method Tj=Tj max. 50 Half Value - IPPM 2 10/1000 sec. WAVEFORM as DEFINED by R.E.A. 0 0 td 1.0 2.0 3.0 4.0 10 1 10 100 t, TIME, ms NUMBER OF CYCLES AT 60Hz FIG.5- TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL 10000 UNIDIRECTIONAL BIDIRECTIONA CJ, JUNCTION CAPACITANCE. (pF) VR=0 1000 100 Tj = 25 C f=1.0MHz Vsig=50mVp-p VR-RATED STAND-OFF VOLTAGE O 10 1 10 100 200 V(BR), BREAKDOWN VOLTAGE. VOLTS - 547 - Version: A06 ELECTRICAL CHARACTERISTICS (TA=25OC unless otherwise noted) GENERAL Device PART Marking NUMBER Code 1.5SMC6.8 1.5SMC6.8A 1.5SMC7.5 1.5SMC7.5A 1.5SMC8.2 1.5SMC8.2A 1.5SMC9.1 1.5SMC9.1A 1.5SMC10 1.5SMC10A 1.5SMC11 1.5SMC11A 1.5SMC12 1.5SMC12A 1.5SMC13 1.5SMC13A 1.5SMC15 1.5SMC15A 1.5SMC16 1.5SMC16A 1.5SMC18 1.5SMC18A 1.5SMC20 1.5SMC20A 1.5SMC22 1.5SMC22A 1.5SMC24 1.5SMC24A 1.5SMC27 1.5SMC27A 1.5SMC30 1.5SMC30A 1.5SMC33 1.5SMC33A 1.5SMC36 1.5SMC36A 1.5SMC39 1.5SMC39A 1.5SMC43 1.5SMC43A 1.5SMC47 1.5SMC47A 1.5SMC51 1.5SMC51A 1.5SMC56 1.5SMC56A 1.5SMC62 1.5SMC62A 1.5SMC68 1.5SMC68A 1.5SMC75 1.5SMC75A 1.5SMC82 1.5SMC82A 1.5SMC91 1.5SMC91A DDJ DEJ DFJ DGJ DHJ DKJ DLJ DMJ DNJ DPJ DQJ DRJ DSJ DTJ DUJ DVJ DWJ DXJ DYJ DZJ EDJ EEJ EFJ EGJ EHJ EKJ ELJ EMJ ENJ EPJ EQJ ERJ ESJ ETJ EUJ EVJ EWJ EXJ EYJ EZJ FDJ FEJ FFJ FGJ FHJ FKJ FLJ FMJ FNJ FPJ FQJ FRJ FSJ FTJ FUJ FVJ Maximum Maximum Maximum Maximum Breakdown Voltage Test Stand-Off Current Voltage Reverse Leakage Peak Surge Clamping Temperature VBR @IT VWM at Vwm Current IPPM Voltage at IPPM Coefficient (Volts) (Note 1) O Min Max (mA) (Volts) ID (uA) (Note 2)(Amps) VC(Volts) of VBR(% / C) 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.8 58.8 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100.0 95.50 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 145 150 134 139 126 130 114 117 105 108 97 100 91 94 82 86 71 74 67 70 59 60 54 56 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 Dimensions in inches and (millimeters) 49 51 45 47 40 42 36 38 33 34 30 31 27 29 25 26 23 24 21 22 19 20 17 18 16 17 14 15 13 13.9 12 12.6 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 108.0 103.0 118.0 113.0 131.0 125.0 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 - 548 - ELECTRICAL CHARACTERISTICS (TA=25OC unless otherwise noted) Breakdown Voltage Stand-Off Maximum Maximum Maximum Maximum VBR GENERAL Device Test Current Voltage Reverse Leakage Peak Surge Clamping Temperature (Volts) (Note 1) @IT(mA) PART Marking VWM at Vwm Current IPPM Voltage at IPPM Coefficient O NUMBER Code Min Max (Volts) ID (uA) (Note 2)(Amps) VC(Volts) of VBR(% / C) 1.5SMC100 FWJ 90.0 110.0 1.0 81.0 5.0 10.9 144.0 0.106 1.5SMC100A FXJ 95.0 105.0 1.0 85.5 5.0 11.4 137.0 0.106 1.5SMC110 FYJ 99.0 121.0 1.0 89.2 5.0 9.9 158.0 0.107 1.5SMC110A FZJ 105.0 116.0 1.0 94.0 5.0 10.3 152.0 0.107 1.5SMC120 GDJ 108.0 132.0 1.0 97.2 5.0 9.1 173.0 0.107 1.5SMC120A GEJ 114.0 126.0 1.0 102.0 5.0 9.5 165.0 0.107 1.5SMC130 GFJ 117.0 143.0 1.0 106.0 5.0 8.4 187.0 0.107 1.5SMC130A GGJ 124.0 137.0 1.0 111.0 5.0 8.7 179.0 0.107 1.5SMC150 GHJ 135.0 165.0 1.0 121.0 5.0 7.3 215.0 0.108 1.5SMC150A GKJ 143.0 158.0 1.0 128.0 5.0 7.6 207.0 0.108 1.5SMC160 GLJ 144.0 176.0 1.0 130.0 5.0 6.8 230.0 0.108 1.5SMC160A GMJ 152.0 168.0 1.0 136.0 5.0 7.1 219.0 0.108 1.5SMC170 GNJ 153.0 187.0 1.0 138.0 5.0 6.4 244.0 0.108 1.5SMC170A GPJ 162.0 179.0 1.0 145.0 5.0 6.7 234.0 0.108 1.5SMC180 GQJ 162.0 198.0 1.0 146.0 5.0 6.1 258.0 0.108 1.5SMC180A GRJ 171.0 189.0 1.0 154.0 5.0 6.4 246.0 0.108 1.5SMC200 GSJ 180.0 220.0 1.0 162.0 5.0 5.4 287.0 0.108 1.5SMC200A GTJ 190.0 210.0 1.0 171.0 5.0 5.7 274.0 0.108 Notes: 1. VBR measured after IT applied for 300us, IT =square wave pulse or equivalent. 2. Surge current waveform per Figure 3 and derate per Figure 2. 3. For bipolar types having VWM of 10 volts and under, the ID limit is doubled. 4. For bidirectional use C or CA suffix for types 1.5SMC 6.8 through 1.5SMC200A. 5. All terms and symbols are consistent with ANSI/IEEE C62.35. - 549 - |
Price & Availability of 15SMC150A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |